Input/Output (I/O) Setup - OHAUS Defender 5000 Serie Manual De Instrucciones

Ocultar thumbs Ver también para Defender 5000 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Defender 5000 Indicators

4.1.5 Input/Output (I/O) Setup

The I/O's setup can be customized for various user preferences.
The I/O's setup is defined below (defaults in Bold).
Item
Enable
Discrete Input 1
Discrete Input 2
Discrete Output 1
Discrete Output 2
Discrete Output 3
Discrete Output 4
Note: The I/O's will only work when the I/O Option Board has been installed. See the Accessory list
in section 9.4 for information.
The option I/O board provides two isolated inputs and four dry-contact normally open relay outputs
which can be used for simple process weighing.
Press the button
With the button corresponding to the icon
down the list and highlight Application Mode.
Enter this sub-menu by pressing the button
corresponding to the icon
In the Application Mode menu enter the Weighing
sub-menu.
The Weighing sub-menu is now displayed.
Select the list item and press the button
corresponding to the icon
setting as desired. After completion of I/O's
setup, press the Softkey corresponding to the
icon
to return to the main application
screen.
Available Settings
On, Off
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Overload, Underload
Off, Overload, Underload
Off, Overload, Underload
Off, Overload, Underload
to enter the Main Menu.
.
to change the
, go
EN-35

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Defender td52pDefender td52xw

Tabla de contenido