Radio Operation - Aiwa MSBTU-300 Manual De Usuario

12
en
BASIC OPERATION CD / MP3
You can play in your Micro System your
audio CD/ CD-R/ CD-RW/ MP3.
(Please do not try to play CD-ROM,
CD-I, VCD or DVD.)
1. Press the button on the top of the
product to open the disc tray.
Insert the CD with the printing side
2.
facing up and close gently the disc
tray by pressing again.
Press SOURCE button to select the
3.
CD MODE.
CD
4. Press to start the playback; for
AUDIO CD , playback starts automatically.
5. Press stop button on unit or on
remote control to stop playback.
SEARCHING FOR A SECTION WITHIN A CD
During playback, press and hold / on
the remote control to find a specific
passage within the track and release it at
the point you want to listen to.
SELECT ANOTHER TRACK OR FILE
Press or button on the remote control
to select a particular track.
LISTENING TO YOUR TRACKS (FILES)
REPEATEDLY
Press REPEAT BUTTON repeatedly to
activate the REPEAT FUNCTION in
following order:
1. REPEAT 1
2. REPEAT ALBUM (*MP3 MODE ONLY)
3. REPEAT ALL
OFF
4.
LISTENING TO YOUR TRACKS (FILES)
RANDOMLY
Press RANDOM button to play tracks in
a random order.
A-B FUNCTION
During CD/MP3 DISC playback, you can
press AB button on remote to start from
the point A (time point you pressed), and
ended point B when you press AB button
again and music will play repeatedly
from A to B.
INTRO FUNCTION
This feature allows you to play the 10
first seconds of each track on the disk.
Load the disc and wait until the display
shows the total playing time and number
of tracks. Press button on the
INTRO
remote control to activate the function,
press again to cancel the function.
PROGRAM: CREATING YOUR OWN PLAYLIST
You can play up to 9 tracks on a CD in order.
Insert a CD and wait for to be read.
1.
2. Press PROG button on the remote
control in STOP status.
3. Press / on the unit or on the remote
control to select the track you want to
program. Press PLAY button on remote
or on front panel of the unit to confirm
your selection.
4. Press on the unit or on the remote
control to play the programmed music
files.
ABOUT MP3 DISC COMPATIBILITY
With this unit is limited as follows:
Sampling Frequency: 32-48 (MP3)
Bit rate: 32-320kbps (MP3)
Do not use special letters such as:
/ :*?< > etc
Even if the total number of files on the
disc has more than 1000, it will only be
shown up to 999.

RADIO OPERATION

1. Press SOURCE button on the remote
control to select TUNER MODE .
2. Tune to the desired radio station by using
/ / / or
CH-/ CH+/ FF-/ FF+
for a Manual tuning.
3. For AUTO TUNING , press button on
the unit or SEARCH button on the remote
control to enter in automatic searching
radio station mode to enter in automatic
searching radio station mode.
PRESET RADIO STATIONS:
You can store up to 40 of your favorite stations
in the tuner memory for easy recall at any time.
Press button on the remote to
1. SOURCE
select TUNER , and press GO TO button,
the LCD will display digital
_ _ _: _ _
input mode, please input FM frequency
of the radio station that what you want to
listen.
For example:
106.20, after input station frequency by
using the number buttons, press PLAY
button to confirm.
2. Once the desired radio station is tuned,
press button on the remote
MEMORY
control, LCD will display CH _ _ input the
preset number you want to store the radio
station.
HOW TO RECALL PRESETS RADIO STATIONS
Press GO TO button on the remote
control, LCD will display , and
CH_ _
press the preset number of the radio
station to recall it.
For example:
Press 1 to play the radio station you preset
in position 1.
If the preset number is above 10, press +10
button on remote control and number key
to input second digit preset number.
13