oneConcept 10027560 Manual De Instrucciones página 19

This function allows you to program the system to switch off itself after a set period of time.
You can set your sleep time in power on mode:
• To activate the sleep function, press the SLEEP button on the remote, the display will show
"Sleep Timer-OFF, 90, 80, 70, 60, 50, 40, 30, 20, 10" and flash.
• When the display shows your desired sleep time, release the button, the sleep timer is
now activated. The display will show "SL10" is to indicate "10 minutes" sleep time and so
on. When the sleep time counts to zero, the unit will go off.
• To cancel sleep, press the SLEEP button once again, the sleep function will turn off.
BT wireless technology is a short-range radio technology that enables wireless communication
between various types of digital devices, such as mobile phone or computer. It operates within
a range of about 10 meters.
Pairing with BT devices:
• Press the ON/STAND-BY button to turn the power on.
• Press the SOURCE button (remote control) to select BT function. (PAIRING indicator flashes).
• Perform pairing procedure on the source device to detect this unit. "oneConcept-V13" will
appear in the detected devices list (if available) in the source device. (Refer the source
device operating manual for details).
Notes:
• Place the devices to be paired within 1 meter (3 feet) of each other when pairing.
• Select "oneConcept-V13" from the source list. If Passcode* is required, enter "0000".*
Passcode may be called PIN Code, Passkey, PIN number or Password.
• Pairing indicator (blue) will stop blinking once the unit is successfully paired with the
source device.(Pairing information is now memorized in the unit.) Some audio source de-
vices may connect with the unit automatically after pairing is completed, otherwise follow
the instructions in the source device operating manual to start connection
Sleep operation (Remote control only)
(10027562 + 10027563)
BT
19