Promax PROLITE-50 Manual De Instrucciones página 89

USER'S MANUAL. PROLITE-50/51/52
Use [ ] and [
change the digits. After setting, press [
NOTE: The default setting is 0.20 dB.
•
Reflection Threshold Configuration
This configuration has direct impact on reflection events listing. Only reflection
events GE this threshold will be displayed in events list.
Under parameter configuration, use [
threshold"; press [
Use [ ] and [
change the digits. After setting, press [
NOTE: The default setting is —52.00 dB.
11-2015
] to adjust the position of highlights; use [
] to confirm.
] to enter, as shown in figure 25. Press [
Figure 25.- Reflection Threshold Configuration
] to adjust the position of highlights; use [
] to confirm.
] and [ ] to highlight "reflection
] to exit.
] and [ ] to
] and [ ] to
Page 31