USER'S MANUAL. PROLITE-50/51/52
5.3 Information Window
Items of information window: measurement parameters, analysis parameters,
and information regarding marker A/B.
For details regarding information window, please refer to 4.4.2 Prolite-50/51/52
information window.
5.3.1 Switch between Information Window Items
Under GUI of figure 39, press [
display in circulation: measurement parameter → analysis information → Event list →
information of marker A/B → measurement parameter.
5.3.2 Review Event List
Under GUI of figure 40, press [
event list information.
Use [
] and [
list,
is to browse upwards and
and downwards by the combining hot key [
keyboard
5.3.3 Cursors
The PROLITE-50/51/52 has two cursors (A and B) available which can be
displaced throughout the trace in order to provide specific information about each point.
In order to exchange the active cursor to use [
press [
] to switch between marker
Use [
] and [
Press [
] to change the information window to A or B marker.
Press [
] or [
A
B
information of
marker will change in agreement with the information window.
11-2015
] and the items of information window will
], items in information window will switch to
] too highlight [
] or [
downwards; or to browse events list upwards
A
B
.
] to move the A or B marker.
] to change the position of the marker A or B, and the
], then press [
] to review events
]+[
] and [
] to select the B
] and [
]+[
] in the
A
icon, later
Page 41