Advanced Port Filtering Page; Puerto Avanzada Página De Filtrado - Motorola SURFboard Guia Del Usuario

Advanced Port Filtering Page

Define port filters to prevent all devices from sending outgoing TCP/UDP traffic to the WAN on specific IP port numbers. Specify a starting and
ending port range to determine what TCP/UDP traffic is allowed out to the WAN on a per port basis.
Note: The specified port ranges are blocked for ALL computers. This setting is not IP address or MAC address specific. For example, to block Note: The specified port ranges are blocked for ALL computers. This setting is not IP address or MAC address specific. For example, to block
all computers on the private LAN from accessing HTTP sites, enter the following:
Start Port: 80 Start Port: 80
•
• End Port: 80 End Port: 80
Protocol: TCP Protocol: TCP
•
• Checkmark: Enabled Checkmark: Enabled
Click Apply Click Apply
•
FIELD
Start Port
End Port
Protocol
Enabled
SVG1202 Wireless Voice Gateway • User Guide
Field Descriptions for the Advanced Port Filtering Page
DESCRIPTION
Enter the starting port number
Enter the ending port number
Select TCP, UDP, or Both from the drop-down list Select TCP, UDP, or Both from the drop-down list Select TCP, UDP, or Both from the drop-down list Select TCP, UDP, or Both from the drop-down list Select TCP, UDP, or Both from the drop-down list
Checkmark to activate the IP port filters
B
26