Footrests Usage; Cleaning And Disinfection - Gima 43270 Guía De Uso

7. Footrests usage

The height of standard footrests can be changed with tools (Figure 9).
To release the screws and then adjust the height to right place for user,
finally tighten the screws.
fig. 9
8. Replacing the Seat and Back Upholstery
Can be removed if necessary by loosening the cross screws (Figure 10).

9. Cleaning and Disinfection

9.1 Clean the upholstery with warm water and a washing-up liquid.
Remove spots with a sponge or a soft brush. Rinse with clear water
and let the components dry.
9.2 Do not use any aggressive cleansing agents, solvents, or hard brushes
etc.
9.3 No wet-cleaning. Components are not machine washable.
For disinfection, water-based agents (e.g. Sagrotan original concentrate)
should be used. The manufacturer's instructions for use must be
observed.
9.4 Before disinfecting, the pads and handles must be cleaned. Plastic parts,
frame parts as well as chassis and wheels can be cleaned with a mild
detergent. Dry thoroughly afterwards.
ENGLISH
fig. 10
16