Footrests Usage; Cleaning And Disinfection - Gima OXFORD Guía De Uso

15

7. Footrests usage

The height of standard footrests can be changed with tools (Figure 9). To release
the screws and then adjust the height to right place for user, finally tighten the
screws.
fig. 9
8. Replacing the Seat and Back Upholstery
Can be removed if necessary by loosening the cross screws (Figure 10).

9. Cleaning and Disinfection

9.1 Clean the upholstery with warm water and a washing-up liquid.
Remove spots with a sponge or a soft brush. Rinse with clear water and let
the components dry.
9.2 Do not use any aggressive cleansing agents, solvents, or hard brushes etc.
9.3 No wet-cleaning. Components are not machine washable. For disinfection,
water-based agents (e.g. Sagrotan original concentrate) should be used. The
manufacturer's instructions for use must be observed.
9.4 Before disinfecting, the pads and handles must be cleaned. Plastic parts,
frame parts as well as chassis and wheels can be cleaned with a mild deter-
gent. Dry thoroughly afterwards.
All manuals and user guides at all-guides.com
ENGLISH
fig. 10