Rowenta DERMA PERFECT Pro Precision Manual Del Usuario página 11

1800130709_EP9870_118x118 10/07/13 09:23 Page11
10. Move the appliance's window over to another area
of skin to be treated. The traces of pressure left on
your skin from the appliance should help you to
get into the right position for administering a new
pulse, and in so doing to avoid superimposing the
pulses or spacing them out too much.
Warning: Do not treat the same area of skin more
than once per epilating session. Repeated
treatment on the same area can cause side effects.
11. Repeat the application starting from stage 8.
Warning: do not apply cosmetics before and during the treatment. It could cause red
patches or burns.
If any burns or blisters appear, you must STOP THE TREATMENT IMMEDIATELY!
IMPORTANT! DO NOT USE THIS APPLIANCE:
• If the skin to be treated is darker than the phototype V illustrated in the table of
the different types of skin / body hair (page 2 and 14).
• On the parts exposed to the sun, to UV rays or treated with self-tanning lotions or
sprays over the last 30 days.
• On beauty spots or dark birth marks. You can however use make-up type white
pencil (which doesn't contain metallic by-products), white non-transparent sticking
plasters or white bandage to cover them up.
• Don't forget to read the sections "WARNING AND SAFETY INSTRUCTIONS"
(pages 6 to 8) as well as the pages on HEALTH WARNINGS (pages 17 to 19).
• At least 24 hours before commencing treatment at level 1 intensity you must carry
out a tolerance test by emitting a light pulse onto your skin (the area to be flashed
must be shaved beforehand).
EN
FR
NL
DE
ES
IT
EL
PT
TR
11