Rowenta DERMA PERFECT Pro Precision Manual Del Usuario página 3

1800130709_EP9870_118x118 10/07/13 09:23 Page3
Depending on the intensity level that you decide upon according to the colour of your skin and
the colour of your body hair, always use the lower level when you use the appliance for the first
time.
Example 1: if your phototype indicates a 3-4 setting intensity, set the appliance to level 3
for the 1 st session. If you don't feel any unpleasantness, you can increase the intensity to
power level 4 for the remaining sessions.
Example 2: if your phototype indicates a 3-4-5 setting intensity, set the appliance to level
3 for the 1 st session. If you don't feel any unpleasantness, you can increase the intensity
to power level 4 for the 2
the intensity to power level 5 for all the following sessions.
Nevertheless, if you feel the slightest pain, reduce the intensity level until the session becomes
comfortable. In this case, it may be necessary to do an extra 1 or 2 sessions to get the best
result.
Don't forget to do a tolerance test by emitting a light pulse on to your skin at least 24
hours before treatment, at level 1 intensity (the area being flashed must be shaved
beforehand).
IMPORTANT! DO NOT USE THIS APPLIANCE:
Until you have read the warnings and safety instructions in the health warnings
section of this manual.
- If the skin that you are treating is darker than the phototype V illustrated in the
table for different skin types.
- On parts which are exposed to the sun, UV rays or which have been treated with
self-tanning lotion or spray over the last 30 days.
Warning: do not apply cosmetics before and during the treatment. It could cause red
patches or burns.
nd
session. If you don't feel any unpleasantness, you can increase
EN
FR
NL
DE
ES
IT
EL
PT
TR
3