Felt Tape Application - Metra 99-7523S Instrucciones De Instalación

Felt Tape Application

Note: Due to differences in factory tolerances you may need to
apply the provided felt tape to the edge of the 99-7523S radio
housing to relieve backlight bleed through.
1. Looking at edge of radio housing apply felt tape to inner
edge (toward back of kit). If it is positioned to closely to the
outer edge you may be able to see it once it is in the dash.
(Figure A)
2. Attach the included six panel clips to the radio housing.
99-7523S
Kit Assembly
(Figure A)
7
Apply to back of both sides