Manual Climate Control - Metra 99-7523S Instrucciones De Instalación

Manual Climate Control:

1. Put the climate control
knob outer trim panel and
the backlight dispersion bar
together and clip into the radio
housing panel as one radio.
Note: You may have to push
down slightly on the middle of
the radio to ease in positioning
it into the kit. (Figures A, B, C)
2. Secure the radio with
the factory hardware removed
in step 9 of the manual climate
control dash disassembly.
Kit Assembly
(Figure A)
ASSEMBLED
Assembled
(Figure B)
Installed
INSTALLED
(Figure C)
99-7523S
3. Secure the light bulb
boards on each side of the
backlight dispersion bar
using the factory hardware
removed in step 8 in
manual climate control dash
disassembly. (Figure D)
4. Unclip and remove the
small oval cover plate at the
bottom center of the factory
radio and insert into the
99-7523S radio housing.
(Figure E)
6
Secure
(Figure D)
(Figure E)