Display Customization - Metra 99-7523S Instrucciones De Instalación

Start the car and test all the climate
control functions.
Note: The air recirculation light will
be on at initial startup and will not go
out until using the climate controls for
the first time.

Display Customization:

1. Press and hold the Clock button
in the factory display until "Set
Text" is displayed then release
button. Settings will begin with the
first character location. Use the
Set button to select the desired
character then press the AMB
button to select the next character
location. There are 10 available
character locations.
2. Once the desired text is entered if
you do not touch any buttons for
10-seconds the display will read
"Saved Text" and your text will
be saved.
Kit Assembly
3. To set the clock press and hold the
Clock button until "Hr. Adjust" is
displayed then use the Set button
to select the desired hour.
4. Press the Clock button again and
the display will read "Min. Adjust"
then use the Set button to select
the desired minutes.
Note: If equipped with a
dimmer button it will still function
as normal.
99-7523S
9