Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Alarm
Operation time can be set for each hotplate separately.
Changing pre-set cooking time
Cooking time can be changed anytime during the operation.
• Simultaneously press
Simultaneously press
•
you want to set the timer.
Within 10 seconds press
•
Checking remaining cooking time
Last set timer is always displayed (
•
Simultaneously press
•
Simultaneously press
•
which you want to see the remaining time. The zone is identified by the lighting on
•
The timer's display will display the remaining time of the selected cooking zone.
Deactivation
When pre-set time elapses, a beep signals the end, and the hotplate is switched off.
Switch off the alarm by pressing the sensor
2 minutes.
If you want to deactivate the timer prior the end of pre-set time:
•
Simultaneously press
Simultaneously press
•
where you want to set the timer. The zone is identified by the lighting on of ;
Press
to the value
•
is turned off and the timer is deactived .
•
Timer can be used as alarm also if it is already employed in timer control of one of the
hotplates.
Timer setting
With the hob off:
Press
to activate the cooking hob;
•
Simultaneously press
•
. If some cooking zone is active,
left, lights on;
•
Simultaneously press
The respective
is located between
The timer value is set by pressing
•
It's possible setting the time in minutes and seconds or, in hours and minutes also for
•
the alarm.
Switching the alarm off
When the pre-set time expires a beep is heard which you can either turn off by pressing
or
, or leave it to turn off automatically after 2 minutes.
If you want to switch the timer off prior expiry of pre-set time:
•
Simultaneously press
Simultaneously press
•
light on;
Press
until the value
•
and
.
and
as many times as necessary, to select the zone where
light on only for the active cooking zones.
and
to modify the time.
has a lighting stronger than the others);
and
;
and
as many times as necessary, to select the zone of
or
and
;
and
as many times as necessary, to select the zone
.
and
to activate the alarm. The timer's display shows
of the first active cooking zone from the
and
as many times as necessary to select the alarm.
or
;
or
;
and
;
and
as many times as necessary to select the alarm,
. The alarm is deactivated.
35
or it switches off automatically after
Publicidad
Tabla de contenido
