Fermax VEO Guía Inicio Rápida página 16

F2
Wifi signal strength icon displayed in the menu:
Between 0% and 20%
or unpaired monitor.
Auto-on
Note: This chapter presents the most basic concepts for quick start-up, for more information download
the DUOX Blue Application for cod mobile manual. 970156 at www.fermax.com.
8
DUOX WIFI VEO VIDEO KIT
11
If the WIFI network and the credentials provided are correct, the monitor will
connect to the Internet and the process will be completed successfully.
12
The application will show the newly linked home as available and connected
(green tick) and the monitor will show the result of the connection as
successful. The white WIFI led will now stay on
13
Once connected, if the user menu is opened again on the monitor, it will
show the intensity of the WIFI signal on the bottom right.
Between
20% and 40%
Message of confirmation
in the monitor pairing pro-
cess.
Between Between
40% and 60% 60% and 80%
14
To test call forwarding, the user can
perform an auto-on and ensure that it
connects to the outdoor panel, (as long
as it is not in use).
User parameter settings:
USER RESET :
A user reset returns the status of the
monitor to unpaired (disconnected from
the Internet).
ERROR
If it is not performed cor-
rectly, an error during the
monitor pairing process.
Between
80% and 100%