Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. Insert the assembled squeezing
barrel and washing rack into the
squeezing cup.
*While inserting the barrel, align it to the
marking point on the squeezing cup
1
5. Install the squeezing body cover
1 When it is installed downwards, the
marking point on squeezing body cover
shall align with that on the squeezing
cup.
2 3 Make "
" at the back of the
protruding part of squeezing body cover
rotate towards "
in clockwise direction and lock.
Marking point on
squeezing barrel
Marking point on
squeezing cup
Marking point on
squeezing body cover
Marking point on
squeezing cup
" on squeezing cup
4. Insert the spiral propeller into
the squeezing barrel.
Rotate the spiral propeller lightly
to its right position.
6. See the figure.
Place the juice/marc receiving
cups in their appropriate positions
(the two cups have the same
overall dimensions).
16
2
3
Publicidad
Tabla de contenido
