Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Disassembly of the squeezing rubber pad
1
Power off to stop the
1.
appliance, and pull the power
plug out.
4
Take the spiral propeller +
4.
squeezing barrel + washing
rack module out of the squee-
zing cup (see the figure 4 ).
After the squeezing process is completed, press
the stop switch, and pull out the power plug.
Warning: Do not store the squeezed juice for
a long time.
2
2. Hold the squeezing body
cover with your hands anti-
clockwise (see the figure 1 2).
Take the squeezing body
cover out when it is rotated to
the position indicated in the
figure.
5. Disassemble the spiral pro-
peller, squeezing barrel and
washing rack module.
18
3
3. Hold the juicer outlet on
the squeezing cup.
Shake it lightly and take it
out (see the figure 3 ).
Make sure that
IMPORTANT.
black part is fixed inside the
squeezing body cover. Using
appliance without black part
can damage the appliance
components.
Publicidad
Tabla de contenido
