Operating; Setting Up; Connecting - Goobay 39512 Instrucciones De Uso

5

Operating

5.1

Setting up

Risk of death and injury due to improper environmental
conditions
• Do not place the product near an open window.
Rain splashing on the fan may cause an electric shock.
• Do not operate the fan in the vicinity of explosive and/or flammable
gases.
• Do not place or operate the product near open flames, cooking or
heatgenerating products such as radiators, heating registers and
stoves.
Make sure that the fan is not near curtains or objects that can be
•
pulled into the fan.
1. Hold the fan only by the plinth (18, fig. 18) and place it on a dust-free,
stable and horizontal surface.
2. Make sure the ventilator has a firm footing.
The fan must not stand on the power cord to prevent it from tipping over
during operation.
3. Turn the front of the fan in the direction you want to ventilate.
Fig. 19: Adjusting the angle of inclination
For fine adjustment, the fan can be tilted at an angle of 45° (± 25°).
4. Tilt the fan to the desired position from which the blower should
come. See Figure 19.
5.2

Connecting

Risk of injury by stumbling and falling
• Mind placing cables in a way, nobody will be disabled and the cable
not be damaged.
• Install the system and devices attached to it in a way that persons
cannot be injured, or objects not be damaged for example by drop-
ping or stumbling.
• Connect the ventilator to a protective contact socket.
Fig. 20: Connecting
19