Alarm1 - Setting Vibrator Alarm Options; Alarm2 - Setting Alarm Options; Test Mode - Testing Flash, Audio, Vibrator And Lamp - HomeAware HA360MK Guia Del Usuario

FLASH, AUDIO AND VIBRATOR ALARM
Alarm1 – Setting Vibrator Alarm Options
1. Press Set Up button and the word LINK will be shown on
the display.
2. Press the Tone button and the word CLOCK will be shown
on the display, press Enter.
3. Press the Tone button until the word ALARM1 is shown on
the display.
4. Press the Enter button and the word FLASH will be shown
on the display.
5. Press the Tone button until the word VIBR is shown on the
display, press Enter.
6. Press the Tone button to toggle between ON or OFF, press
Enter on your selection.
7. While in the Set Up mode, the alarm indicators on the right
side will light up showing the alert options chosen (sound,
flash, and vib).
Alarm2 – Setting Alarm Options
Follow the same steps above when setting ALARM2.
Test Mode (Testing Flash, Audio, Vibrator and Lamp)
1. Press Enter and Back buttons together, the word TEST will
be shown on the display. The audio, vibrator, strobe and
lamp flash will be activated, so you will be assured that all
three alerts are working.
2. Press and hold the SNOOZE button for 2 seconds to
complete test mode.
SETTINGS
18
Continued