HomeAware HA360MK Guia Del Usuario página 33

SONICBRIDGE™ / LAMP SWITCH
3. Your now connected to the home power line which will allow
the HomeAware™ to communicate with your traditional Sonic
Alert remote receivers.
4. If you would like to utilize the option of a flashing lamp for
your alerts simply plug any lamp into the SonicBridge™ and
turn the lamp switch to the on position. Your lamp can now
be turned on and off through the HomeAware™ Main unit by
pressing the snooze button for on and off.
Important notes for lamp bulb type
Lamp light bulb must not exceed 300 watts. Also make sure the
lamp is in the on position and that the bulb is a good bulb.
Bulb types to use in lamps are as follows;
Incandescent, LED, and instant on CFL type bulbs must be
used.
31
Continued