Alesis AcousticLink Guia De Inicio Rapido página 8

MAC (OSX 10.6)
Set Acousticlink as your default recording device:
1. Click on the Mac desktop so that Finder is
displayed in the upper-left of the screen.
2. Select the Go menu from the top of the screen
and choose Utilities.
3. In the window that opens, double click Audio
MIDI Setup.
4. Once the Audio MIDI Setup utility is open,
select the Window menu at the top of the screen
and select 'Show Audio Window'.
5. In the window that opens, click the + button to
create an aggregate device.
6. Highlight the Aggregate Device in the left panel
and then put a check mark in the box on
the right side panel for USB PnP Sound Device
as well as Built-in Output.
7. Make sure Aggregate Device is highlighted in
the left panel and then click on the cog wheel.
Select 'Use this device for sound input'.
8. Highlight the Built-In output option in the left
panel, click the cog wheel and select 'Use this
device for sound output'.
9. Close out of the Audio Setup window.
8