Playing Dlna Streaming; Playing Internet Audio Streaming - Ecler essentials ePlayer 1 Manual De Instrucciones

5.3.2. Playing DLNA streaming

Audio contents can be streammed point-to-point, connecting your device to ePLAYER1's Wi-Fi interface
(see chapter 6.4.2) or through a home Wi-Fi network (see chapter 6.4.3). DLNA is not available for a wired
Ethernet connection.
First, check that your device and ePLAYER1 are in the same network. Then, press ENTER/MENU (6) key
on ePLAYER1 to access main menu. In sub-menu SOURCE, rotate CONTROL & SELECT (2) digital encoder to
select DLNA source and press it to confirm (SELECT). Parameter will blink until selection is confirmed. The display
will show the message DLNA MODE blinking. Now, ePLAYER1 is ready to receive DLNA streams.

5.3.3. Playing Internet audio streaming

Connect ePLAYER1 to the Internet through the Ethernet port or Wi-Fi interface (see chapter 6). Press
ENTER/MENU (6) key to access the main menu. In sub-menu SOURCE, rotate CONTROL & SELECT (2) digital
encoder to select a playlist (check chapter 6 to learn how to configure them) and press it to confirm (SELECT).
Parameter will blink until selection is confirmed. Press  (9) to start playing.
If the system cannot find/read the playlist please, check the Internet connection and/or network
configuration of the device.
iOS© device streaming through AirPlay
Android© device connected to ePLAYER1 for DLNA streaming
11