System; Firmware Upgrades; Cleaning - Ecler essentials ePlayer 1 Manual De Instrucciones

6.6. System

SYSTEM page allows access to administrator settings: device's name, web application's password,
rebooting, restore default settings, security backups or firmware upgrade.
6.6.1. Firmware upgrade
Visit www.ecler.com to download last ePLAYER1's firmware version. Select ".bin" file through the web
application: /System/Flash Firmware. Select "Flash image...". Device will reboot with the new firmware. To check
that the firmware upgrade has been done successfully go to the setup menu (section 5.4).

7. CLEANING

The front panel should not be cleaned with dissolvent or abrasive substances because silk-printing could
be damaged. To clean it, use a soft cloth slightly wet with water and neutral liquid soap; dry it with a clean cloth. Be
careful that water never gets into the unit through the holes of the front panel.
Firmware upgrade via web application
19