Shut-Down Procedure; Daily Cleaning - Wells M4200 El Manual Para La Operacion Europea

ACTION
1. When last product is done for the day
open door of oven and let it remain open.
2. Press button.
[ UTILITY ]
3. Press . Fan will start
[ START ]
4. Allow cool-down process for a minimum
time of 3 to 5 minutes
5. Press power switch OFF
Interior of oven can then be safely cleaned.
CAUTION: ELECTRIC SHOCK HAZARD
Disconnect appliance from electric power before cleaning
CAUTION: BURN HAZARD
Allow appliance to cool to 150ºF or less before cleaning.
Do not attempt to clean the oven until it has cooled to 150ºF
It can burn you. Hand protection required.
IMPORTANT:
DO NOT use steel wool or abrasive cleansers for cleaning this appliance.
Always wipe or rub in direction of polish lines or grain of metal.
IMPORTANT:
DO NOT spill or pour water into control panel or wiring.
Damage to internal components from water damage is not covered by warranty.
PREPARATION
FREQUENCY
TOOLS
1. With power switch ON, open oven door. Press
Display will read FAST COOL MODE
Press .
[ START ]
Display will read COOL DOWN and fan will start.
When oven has cooled, press power switch to OFF.
2. Wipe down interior of oven and inside surface of door with
a clean towel dampened with water
3. Dry by wiping with a clean dry towel.
4. Wipe control panel with a clean dry towel
to remove any build-up of grease or food particles.
PROCEDURE IS COMPLETE

SHUT-DOWN PROCEDURE

DAILY CLEANING

Allow oven to cool to 150ºF
Daily
Clean Towels
(65ºC)
or less
(65ºC)
.
[ UTILITY ]
8
DISPLAY WILL READ
FAST COOL MODE
COOL DOWN
or less.