Fcccompliance Statement - Tyco DSC HSM2HOST Guía De Usuario

FCC Compliance Statement
This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance with the man-
ufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with
the limits for Class B device in accordance with the specifications in Subpart "B" of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference in any residential installation. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause interference to television or radio reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fol-
lowing measures:
- Re-orient the receiving antenna
- Relocate the alarm control with respect to the receiver
- Move the alarm control away from the receiver
- Connect the alarm control into a different outlet so the alarm control & receiver are on different circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may
find the following booklet prepared by the FCC helpful: "How to Identify and Resolve Radio/Television Interference Problems". This
booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock # 004-000-00345-4.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
requirements of the above mentioned standards.
© 2014 Tyco Security Products. All Rights Reserved. www.dsc.com
The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any
misuse of the trademarks is strictly prohibited and Tyco will aggressively enforce its intellectual property rights to the fullest extent
of the law, including pursuit of criminal prosecution wherever necessary. All trademarks not owned by Tyco are the property of their
respective owners, and are used with permission or allowed under applicable laws. Product offerings and specifications are subject
to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region;
contact your sales representative.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux con-
ditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'util-
isateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus meets all requirements of the Canadian inter-
ference-causing equipment regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences de règle-
ment sur le matériel brouilleur du Canada.
IC:160A-HS2HOST9.
The term 'IC:' before the radio certification number only signifies that Industry
Canada technical specifications were met.
EU Compliance Statement
The Model HSM2HOST8 Wireless Transceiver has been certified by Tele-
fication according to EN50131-1:2006 + A1:2009 and EN50131-3:2009, for
Grade 2, Class II.
Note: For EN50131 compliant installations only, the intrusion portion of the
alarm system has been investigated. Fire Alarm and Auxiliary (Medical)
Alarm functions were not included in the evaluation of this product under the