QAcoustics Media 4 User Manual página 13

Line In 2
The 3.5mm input jack is ideal for connecting to the headphone output of an external audio
source using the 2m cable provided:
HEADPHONES
Important Note:
With a jack plugged into LINE IN 2, LINE IN 1 is switched-off and no audio will be heard from this source.
The ANALOGUE INPUTS are automatically selected when no Bluetooth device is connected and
playing, and no Optical Digital Input signal is present. The Status LED will be GREEN when an
analogue input is in use.
Please Note:
When connecting to a variable level source, such as a headphone output, better audio quality will be
achieved by having the source set at a higher volume level and the unit at a lower level than the other way
around.
4. Subwoofer Out
Single RCA phono jack. Connect the 'Sub Out' to a Subwoofer Line Level Input if extended bass
response is desired.
5. Bluetooth Pair Button
The unit has been designed to automatically search for, and PAIR with a device should no other
devices currently be PAIRED and in range. This Bluetooth Pair button is used to manually drop
the current connection and pair with a new device.
6. Power Switch
Turns the power to the unit ON/OFF.
Important Note:
Always turn the power OFF when making connections to the Rear Panel.
7. AC Input
Universal power connector. Automatically selects AC voltage for a given region. Connect to the
included AV Power Cord for your country.
OPTICAL IN
PAIR
R
LINE IN 1
3.5mm Jack Lead (included)
13
POWER
LINE IN 2
ON
100 - 240V~, 50/60Hz
100 WATTS
L
SUB OUT
DESIGNED IN THE UNITED KINGDOM. MADE IN P.R.C
Instructions
TO REDUCE THE RISK OF ELECTRIC SHO
COVER (OR BACK). NO USER-SERVICA
OFF
REFER SERVICING TO QUALIFIED SER
T1.6AL 250V
RISK OF ELECTRIAL SHOC
RISK OF FIRE
REPLACE FUSE
WARNING: SHOCK HAZARD - DO N
AS MARKED
AVIS: RISQUE DE CHOC ELECTRIQUE-N
NOT SUITABLE FOR IN-WALL M
Q14698-SK
CAUTION:
DO NO OPEN