Deleting A Scenario (On The Transmitter); Problems And Solutions - LEGRAND Celiane 672 51 Manual De Instrucciones

Inter individuel avec orientation de lamelles
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Deleting a scenario (on the TRANSMITTER)

Delete all the scenarios linked to the control button
Press LEARN
Delete all the scenarios
Press LEARN

Problems and solutions

Problem
The learn indicator light comes on
for 5 seconds.
The learn indicator light comes on
for 10 seconds.
During learning the learn indicator
light stops blinking.
The programmed function button
does not work.
On saving the scenario,
the learn indicator lights
of some receivers do not go off.
Press the control button
and hold for 10 secs
Press LEARN
and hold for 10 secs
15
Cause
Learning is impossible.
The number of saved
transmitters is more than 32.
The learning mode shuts down
after 10 minutes
(if no action).
After pressing the learn button,
the learning of the function button
is done in the minute that follows.
Incorrect communication
between the products.
16
5 s
The scenario is deleted
Product goes back
5 s
to factory settings
Solution
Install compatible products.
Delete the unused scenarios.
Restart the learning.
Restart the learning.
Check the cabling (connection).
Look for a possible
interference device.
Insulate with a filter.

Publicidad

Tabla de contenido
loading

Tabla de contenido