Temperature; Vibrating Alert; Voice Control (Vox Function) - Gigaset PA530 AUDIO plus Manual Del Usuario

Idiomas disponibles

Settings

Temperature

You can monitor the temperature in the baby's room. Healthcare professionals advise that the

ideal temperature for your baby's room is between 16 °C and 20 °C. When the temperature is

≥ 25°C or ≤ 15°C in the system, the temperature alert (BEEP, VIBE or BEEP&VIBE) is activated.

When the function is set to ON,

Press the OK/Menu key

Select TEMP SET and press the OK/Menu key

Select BEEP, VIBE or BEEP&VIBE and press the OK/Menu key

To confirm a given alarm ( is flashing) press the OK/Menu key

change within the next 2 minutes, the alarm will be given again.

You can set your parent unit to vibrate should the noise levels in your baby's room reach the

sensitivity of the sound sensor.

You can use this function, if thre volume on the parent unit is set to "VOL MIN" (= OFF).

When the function is set to ON,

Press the OK/Menu key

Select VIBE SET and press the OK/Menu key

Select ON or OFF and press the OK/Menu key

(Background noise suppression)

When the voice control (VOX function) is activated, background noise will be suppressed. That

means, that the parent unit's loudspeaker will be switched on, when the volume from the

baby's room is above a defined level.

When the function is set to ON,

Press the OK/Menu key

Select VOX SET and press the OK/Menu key

Select ON or OFF and press the OK/Menu key

will be displayed.

. If the conditions do not

Tabla de Contenido