Installing The Batteries - Targus DEFCON Guía Para El Usuario

Ocultar thumbs Ver también para DEFCON:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
Targus Notebook Security DEFCON
Before adjusting the cable length, enter the current com-
bination and unlock the DEFCON Ultra.
To extend the cable:
1 Press and hold down the trigger.
2 Pull the cable away from the unit.
3 Let go of the trigger to set the cable length.
Repeat the above steps until the cable reaches the
length you want.
To retract the cable, or shorten the length, press and hold
down the trigger while guiding the cable into the unit. Let
go of the trigger when you have finished rewinding the
cable.
WARNING: T
TO WHIP AROUND IF NOT CONTROLLED
DAMAGE OR PERSONAL INJURY WHEN RETRACTING THE CABLE
RELEASE THE TRIGGER IN A PULSING MOTION SO THAT IT REWINDS SLOWLY

Installing the Batteries

The DEFCON Ultra is equipped with a two-level motion
alarm feature. To use this feature, or to hear the alarm
siren if the cable is tampered with, you must install three
AAA batteries.
To prevent a potential thief from silencing the alarm, the
battery cover is designed to lock when the DEFCON
Ultra is locked. To add or change the batteries:
1 Using the dials, enter the current combination.
HE CABLE RETRACTS QUICKLY AND MAY CAUSE THE PLUG HEAD
11
®
Ultra Combination Cable Lock
. T
O AVOID POSSIBLE PROPERTY
,
PRESS AND
.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido