Activating The Motion Alarm - Targus DEFCON Guía Para El Usuario

Targus Notebook Security DEFCON

Activating the Motion Alarm

NOTE: N
SUCH AS A BUS
.
ALARM
Level 1 - Low Sensitivity
To set the motion alarm for low sensitivity:
1 Secure and lock the DEFCON Ultra. See "Securing
and Locking the DEFCON Ultra" on page 9 for more
information.
2 Press and hold the activate motion alarm button until
you hear two beeps.
3 Release the button.
The status light flashes twice every second indicating
that the motion alarm is armed at level 1.
Level 2 - High Sensitivity
To set the motion alarm for high sensitivity:
1 Secure and lock the DEFCON Ultra. See "Securing
and Locking the DEFCON Ultra" on page 9 for more
information.
2 Press and release the activate motion alarm button,
then immediately press and hold the button again until
you hear three beeps.
3 Release the button.
The status light flashes three times every second
indicating that the motion alarm is armed at level 2.
EVER ACTIVATE THE MOTION ALARM WHEN IN A MOVING VEHICLE
, ,
TRAIN OR AIRPLANE
®
Ultra Combination Cable Lock
,
AS THE VIBRATIONS MAY TRIGGER THE
14