Boosting The Bass - Harman JBL CINEMA SB200 Guia De Inicio Rapido

ADJUSTING THE SYSTEM'S VOLUME
Press the soundbar's or remote's Volume + and – buttons to raise and
lower the system's volume one step at a time. Hold down the buttons
to continuously raise or lower the volume.
Volume Buttons
For the best sound, we recommend turning your TV's built-in speakers
off. Consult your TV's owner's manual to find out how to do this.
MUTING THE SYSTEM
Momentarily press both of the soundbar's Volume buttons at the
same time, or press the remote's Mute button to mute the system.
(Both Volume indicators illuminate.) Momentarily press either of the
soundbar's Volume buttons or press the remote's Mute button again to
un-mute the system. (The Volume indicators turn off.)
Both Volume Buttons
CHANGING THE SURROUND MODE
Press the soundbar's or remote's Surround Mode indicator to switch the
sound between normal stereo (the Surround Mode indicator lights white)
and HARMAN Display Surround (the Surround Mode indicator lights
amber). The HARMAN Display Surround setting will produce a complete
surround-sound experience for anyone sitting in front of and several
feet away from the soundbar. Although it is particularly effective when
watching movies, you can also try the HARMAN Display Surround setting
for music.
Surround Mode Button
6
Volume Buttons
BASS
Mute
Button
BASS
Surround Mode
BASS
Button

BooStINg thE BASS

Press the remote's Bass Boost button to enhance low-frequency
performance, resulting in bass with more impact, which you may
prefer while watching movies or listening to music. There is no harm in
experimenting with this control. Pressing the Bass Boost button again
will return the soundbar's normal low-frequency performance.
LEArNINg Your tV rEMotE'S VoLuME ANd
MutE CoMMANdS
You can program the soundbar so it will respond to your TV remote's
volume up, volume down and mute commands. This will let you control
both the soundbar and your TV with a single remote. Before you begin
to program the soundbar, have your TV remote in hand.
1. Press and hold the soundbar's Surround button until the button
begins flashing amber.
2. Hold your TV's remote approximately 12" (30cm) from the front of the
soundbar and aim the remote directly at the soundbar:
30cm
(12")
TV
Remote
• Press the TV remote's volume up button while pressing and holding
the soundbar's Volume + button. If the programming was successful
the soundbar's Surround button will change from amber to solid
white for one second, then will return to flashing amber.
A) Hold Down Soundbar's
Volume + Button
B) Press TV Remote's
Volume Up Button
Bass Boost
BASS
Button
Press and Hold Until
Button Flashes Amber