Aiphone JO-1FD Manual De Instalación Y Operación página 10

Activating door release
Monitoring door station
NOTES:
• To talk to door station during monitoring, momentarily push
• The monitoring turns off automatically after approx. 1 minute.
• Pushing of the master monitor station while the expansion monitor station is used to monitor the entrance enables monitoring the
entrance with both the master monitor station and the expansion monitor station.
• Pushing of the master monitor station while the expansion monitor station is used to monitor the entrance enables communication
between the master monitor station and the door station. The expansion monitor station continues monitoring and the communication
come from stations.
• Pushing of the expansion monitor station while the master monitor station is used to monitor the entrance enables communication
between the expansion monitor station and the door station. The master monitor station continues monitoring.
Adjust call tone volume
NOTES:
• There are four call tone volume settings to cycle through: [
The current volume level is displayed on the screen and disappears in approx. 5 seconds. The default setting is [
Night illumination
At night, the door station White light LED lights up during calling or monitoring door station.
10
1
Press .
2
Door release is activated and door can be opened.
During release: Status LED lights.
1
Push in standby mode.
2
The video image from the door station and the incoming audio is heard.
If you do not push , the caller will not hear sounds from the inside
station.
3
Push to end monitoring.
. This allows communication with door station.
1
Push in standby mode to adjust call tone volume and display the
volume level.
2
Push until the desired call tone volume level is heard.
] (Mute), [ ] (Minimum) - [
<When the white light LED is lit up during monitoring door station>
When is pushed during monitoring door station, the White light LED will
light up.
When monitoring door station ends, the White light LED will turn off.
NOTES:
• The door station evaluates lighting conditions to automatically turn on the
white light LED when necessary.
] (Maximum).
] (Medium).