Aiphone JO-1FD Manual De Instalación Y Operación página 7

MOUNTING
jO-1FD
<Back wiring>
3
Mount the unit on the
mounting bracket.
<Surface wiring>
When the wiring is not coming through the wall, the wires can be routed to the top or bottom of the unit. Remove a cable inlet plate on the
upper part of the unit to allow passage of the wiring into the unit.
Remove cable inlet plate
1
Fasten the mounting
bracket to the wall
Wires
Mounting screw × 4
(Screw shaft: Ø4.1)
(Slotted Head: Ø8.2 or less
Height 3.0mm or less)
(not included)
3-gang box
83.5mm (3-5/16")
Mounting bracket
(attached to the unit with shipment)
2
1. Press release button to insert or remove wire.
2. Insert wire into the terminal.
8mm
(3/8")
Wires
Wood mounting screw × 4
(Screw shaft: Ø4.1)
(Slotted Head: Ø8.2 or less
Height 3.0mm or less)
(not included)
92mm (3-5/8")
83.5mm
(3-5/16")
Mounting bracket
(attached to the unit with
shipment)
7