Step 7 Placing The Dishwasher And - Samsung DW80H995 Serie Manual De Instalación

Ocultar thumbs Ver también para DW80H995 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STEP 7
t.
PLACING
THE DISHWASHER
AND CONNECTING
THE HOT
WATER SUPPLY
LINE
Adjust the three leveling legs at the bottom
of the dishwasher
after measuring
the height
of the cabinet opening
from under the countertop
to the floor. (See Step 8, Leveling the
Dishwasher.)
2.
Locate the hot water
supply line and the power cable.
3.
Place the dishwasher
so that the hot water
supply line is in the left channel and the power
cable is in the right channel of the base of the dishwasher.
Use standard
duct tape or cable
ties to secure the water
line and electrical
cable to their adjacent
channels in the base. This
can prevent the the water
line and electrical
cable from being squeezed
when you push the
the dishwasher
into place.
4.
Pull the drain hose through
the hole in the sink cabinet side wall. Keep it free of kinks.
5.
Make sure the hot water supply
line is not twisted,
and then connect
the hot water supply
line to the elbow joint.
6.
Slide the dishwasher
carefully into the installation
space.
If possible,
gently pull any excess
lengths of water
supply line, drain hose, or power cable back as you move the dishwasher.
Get a second
or third person to help you do this if necessary.
Do not place the dishwasher
on the water supply
line, drain hose, or power
cable.
.......
Also, make sure they are not folded or twisted.
/_
Make sure the supply line is properly
connected.
.......
_
Wrap Teflon tape around
ever, connection
to prevent water leaks.
<Figure
6>
<Figure
7>
Hot Water
Supply Line
Elbow( s/8" (9.Smrn))
Inlet valve
I Do not overtighteothe 900elbow.
Doing so may damagethe water
inlet valve and cause a water leak
Make sure the dishwasher
is positioned
to the center.
14 installing the dishwasher
D1,*Tg0H9950US
00151A
06 EN
150216illdd
Sec3:14

Publicidad

Tabla de contenido
loading

Tabla de contenido