And Cautions - Samsung DW80H995 Serie Manual De Instalación

Ocultar thumbs Ver también para DW80H995 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STEP 3
CHECK WATER SUPPLY
REQUIREMENTS
AND CAUTIONS
*
The hot water supply
line pressure
must be between
20-120
psi (140-830
kPa).
Adjust the water
heater to deliver water between
120 °F (49 °C) - 149 °F (65 °C).
The dishwasher
must be connected
to a hot water supply
between
120 °F (49 °C) - 149 °F
(65 °C). This temperature
range provides the best washing
result and shortest
cycle time.
Temperature
should not exceed 149 °F (65 °C) to prevent damage
to dishes.
Ensure that the water supply valve is turned off before connecting
the hot water
supply line to
the dishwasher.
Seal the hot water supply line connections
using teflon tape or sealing compound
to stop any
water leakage.
The hot water supply line must pass through
the channel on the bottom
of the dishwasher
as
shown
in Figure 2. Do not place the dishwasher
on the water supply
line.
The drain hose connected
to the dishwasher
must be run through
the hole in the side wall so
it can be connected
to the drain outlet of the sink. When you install the dishwasher,
ensure
there is nothing
on the drain hose and be careful not to tear it during the installation
process.
<Figure
2>
4¼~6¼
in.
(110 ~ 160rnrn)
Dishwasher
bottom
installing
the dishwasher ' 9
D1,*Tg0H9950US
00151A
06 EN
150216illdd
See3:9

Publicidad

Tabla de contenido
loading

Tabla de contenido