babymoov A015015 Instrucciones De Uso página 10

b. Turning off the nightlight
After passing the 3 intensity levels, press the "Night light" button (d) for the 4
c. Changing the colour of the nightlight
- Turn on the night light by pressing the "Night light" button (d).
- Press the "Parameters" button (b). There 7 colours available in the following order:
Blue - Purple - Pink - Green - Yellow - Orange - Red.
- To go to the "scroll colours" function, press the "Parameters" function (b) for the 8th time.
d. Automatic nightlight (according to the temperature in the room)
To switch to the automatic night light function, turn on the night light (e) by pressing the "Night light" button (d). Press the
''Parameters'' (b) and ''Nightlight'' (d) buttons together for 3 seconds. The nightlight temperature icon (j) appears. The colour of
the nightlight depends on the temperature in the room:
Blue Purple
< 14 °C 14 °C - 16 °C
If you press the "Parameters" button (b) and the "Nightlight" button (d) again together for 3 seconds, you will go back to manual
mode. The nightlight temperature icon (j) disappears.
e. Nightlight Timer function (i)
- Turn on the night light by pressing the "Nigh light" button (d).
- Press together the "Mode" (c) and "Night light" buttons (d) for 3 seconds.
- The clock starts to flash. Set for how many hours you want to program the appliance by pressing the "Mode" (c) button.
Programming is only carried out in hours and not minutes. To save your selection, press the "Parameters" button (b).
- The nigh tlight's timer (i) can be set from 1 hour to 23 hours.
- The programming is saved until you change it. This way, you just need to program the appliance once if you want the night light on
for the same number of hours every day.
- Press the "Mode" button (c) for 3 seconds to turn the night light's timer (i) off. If you turn off the night light (e) while the night light
timer (i) is on, the timer will turn off after a minute.
- To adjust the intensity of the night light, press the "Night light" button (d).
- To change the colour of the night light, press the "Parameters" button (b).
- Depending on the temperature in the room, the timer and the colour function can both be activated at the same time.
- Always disconnect the power before cleaning the Well-being night light.
- Clean using a slightly damp soft cloth or sponge. Allow to dry naturally. Never put the Well-being night light into water or any
other liquid.
- Never use scouring pads, abrasive or solvents for cleaning: they are liable to damage the Well-being night light.
10
Pink
16 °C - 19 °C 19 °C - 21 °C
MAINTENANCE
WELL-BEING NIGHT LIGHT • Instructions for use
th time and the night light will turn off.
Green Yellow
21 °C - 24 °C
Orange Red
24 °C - 27 °C > 27 °C