Assembly Instructions - Assembling The Antenna - General Electric HD 200 Manual Del Usuario

ASSEMBLING THE ANTENNA:
1) Attach Monopoles to Antenna Main Body:
a) Take provided Monopoles and Lock Washers and
screw in sides of Antenna Main Body. Make sure that
all four Monopoles are tightly secured.
2) Attach Antenna End Caps to Antenna Main Body:
a) Take the provided Antenna End Caps and screw them
on each side of the Antenna Main Body (see note below):
NOTE: The Antenna End Caps are there to protect the
Monopoles from any outside elements. Make sure the
Antenna End Caps are secured tightly to each end of
the Antenna Main Body but not so tight that the
grooves become stripped.
8