Replacing The Battery - Tyco Visonic PowerG KP-241 Guia De Inicio Rapido

KP-241 PowerG wireless portable keypad

Replacing the battery

Caution!
There is a risk of explosion if the battery is replaced by an incorrect type.
Contact your installer to identify the correct battery type.
1 Slide out the battery compartment cover.
2 Remove the old battery and insert the new battery. Ensure correct polarity.
3 Close the cover.
Warning!
Dispose of used batteries according to the manufacturer's instructions
and according to local rules and regulations.
Cleaning the keypad
Clean the keypad using a lint-free cloth or soft wipes. Lightly moisten the cloth or
wipes with water, household glass-cleaning agent, or low concentration isopropyl
alcohol (IPA).
Warning! Do not use cleaning products that contain acids, bleach or corrosive
agents.
D-307871 KP-241 PG2 Quick Start Guide
Specifications
Table 5. Specifications
Feature Description
Dimensions (h x w x d) 127 x 70 x 24 mm or 5 x 2-3/4 x 31/32 in
Weight 125 g (4.4 oz.), including battery
Battery 1 x 3 V, CR123A type.
Note: Use a GP or Panasonic battery only
Battery life 3 years of typical use
Operating temperature 0°C to 49°C or 32°F to 120°F
Relative humidity 93% non-condensing
Frequency bands 433-434 MHz, 868-869 MHz, 912-915 MHz,119–135 KHZ
Max Tx power 10 dBm @ 433 MHz, 14 dBm @ 868 MHz, 66 dBμA/M @
10M @ 119-135 KHz
Refer to your control panel User Guide
with the KP-241 PG2 keypad.
For detailed installation instructions for the KP-241 PG2 keypad, refer to D-307872 at
http://www.visonic.com/download-center. Alternatively, contact us at
info@visonic.com to request the complete version of the installation guide.
for more details on features you can control
5