MANUAL SCOPE
GENERAL
WARNINGS
2
The purpose of this manual is to provide instructions for:
– becoming generally familiar with the product;
– its correct installation;
– loading the materials and for safe and efficient use of the equipment.
Moreover you will find:
– general technical features of the product;
– procedure to access the menu and set the parameters;
– maintenance procedures;
– troubleshooting and problem solutions;
– other useful documentation.
The product must always be used according to the procedures included in this manual and
never for purposes other than the ones indicated.
THE USER IS RESPONSIBLE FOR ALL LEGAL REQUIREMENTS
RELATED TO THE INSTALLATION AND USE OF THIS PRODUCT. THE
MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY BREAKAGE,
MALFUNCTIONS, PROPERTY DAMAGE OR INJURY IN THE EVENT
THAT THE PRODUCT IS NOT INSTALLED OR USED CORRECTLY.
Please observe the following precautions in order to avoid injury or property damage; in
particular:
– ONLY use recommended detergents and chemical additives. The use of other products
could damage the unit.
THE USE OF DETERGENTS OR CHEMICAL ADDITIVES DIFFERENT
FROM THE ONES RECOMMENDED COULD LEAD TO A SERIOUS
DAMAGE OF THE UNIT. SEE APPENDIX A.
– Do not pour water or other liquids or inflammable products on the equipment;
– Do not se the equipment in the presence of gas or explosive or inflammable vapors;
WHENEVER IT IS NOT POSSIBLE TO DISCONNECT THE ELECTRICITY
TO THE DEVICE, OR IF THE EXTERNAL POWER GRID SWITCH IS FAR
AWAY OR, AT ANY RATE, NOT VISIBLE TO THE MAINTAINER, PLACE
A WORK IN PROGRESS SIGN ON THE EXTERNAL POWER GRID
SWITCH AFTER TURNING IT OFF .
– Make sure the electrical system is grounded conforming to current laws and/or
standards;
– Do not remove any label or nameplate from the device; request new ones, if
necessary.
– Do not lean on the door and do not use it as a step.
– Only use original replacement parts.
THE FAILURE TO OBSERVE THE ABOVE, RELEASES THE
MANUFACTURER FROM ALL LIABILITY.
WARNING
WARNING
WARNING
WARNING