Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
VM9423
The Dialed Calls list retrieves the list of dialed numbers from
your phone. The last dialed number is the first number on the
list. Touch the Dialed Calls menu option to view the list. To
make a call from the Dialed Calls list, touch the number and
then touch the
button. The TFT will display "Cannot get
dialed record" when the feature is not available.
Received Calls
Use the Received Calls list to view the last 10 received
numbers stored on your phone. To access the Received list,
touch the Received Calls menu option. The last received
number is the first number on the list. To make a call from the
Received Calls list, touch the number and then touch the
button. The TFT will display "Cannot get received record"
when the feature is not available.
Phone Book
1.
Touch the Phone Book menu option to display the
phone book stored on your mobile phone, if compatible.
The screen will display "Ready..." while the phone book
is downloading.
2.
Once the download is completed, you can use the arrow
buttons and scroll bar on the right side of the window to
navigate the list. Since the unit downloads one page of
entries at a time, there may be a slight delay while the
next page of numbers is downloaded.
3.
Touch to highlight the number you want to dial and then
touch the
button.
NOTE: Some mobile phones do not support Phone Book
upload through Bluetooth. This is a limitation of the
phone, not the VM9423.
Bluetooth Setup
Auto Answer
You can choose to have the VM9423 automatically answer
incoming calls to your paired Bluetooth phone. To turn "Auto
answer" on:
1.
Touch the
button to view the SETUP menu.
2.
Select the "Bluetooth" sub-menu.
3.
Touch the area to the right of "Auto answer" to select
"On".
Auto Connect
The auto Connect option will allow the VM9423 to
automatically connect to your previously paired Bluetooth
when it is in range. When the Connect option is set to
"Manual", you must press the
button to re-establish a
connection with your phone. To turn auto "Connect" on:
1.
Touch the
button to view the SETUP menu.
2.
Select the "Bluetooth" sub-menu.
3.
Touch the area to the right of "Connect" to select "Auto".
Advanced Audio Distribution Profile
(A2DP)
The VM9423 allows you to play back audio files from your
phone, PDA or personal music player using a Bluetooth
connection.
Before using an audio player, it may be necessary to enter a
PIN code into the unit. Enter the PIN code referring to
"Bluetooth Sub-menu Features" on page 10.
NOTE: Please quit A2DP mode before attempting to
make a phone call, as unexpected results may occur
depending on your mobile phone model.
The VM9423 can control a Bluetooth audio player via
Advanced Audio Distribution Profile (A2DP) or Audio/Video
Remote Control Profile (AVRCP). Bluetooth audio players (or
Bluetooth adapters) compatible with these profiles can be
connected to this unit. Functionality varies depending on the
profile used:
•
A2DP: Stream audio from your Bluetooth compatible
audio player and listen to the music through your
VM9423. Play/pause, song selection, etc. are not
possible.
•
AVRCP: Play back, pause, select songs, etc. while
streaming audio from your Bluetooth compatible audio
player to the VM9423.
NOTE: Song information (e.g. elapsed playing time, song
title, song index, etc.) cannot be displayed on this unit.
Since there are a number of Bluetooth audio players
available on the market, operations with your Bluetooth audio
player using this unit vary greatly.
Please refer to the instruction manual that came with your
Bluetooth audio player as well as this manual while operating
your player with the VM9423.
Refer to the MUSIC INTERFACE instructions under
"Bluetooth User Interface" on page 26 for information about
on-screen indicators and touch screen functions that may be
available during audio playback.
28
Publicidad
Tabla de contenido
