ClearSounds CS-A300 DECT 6.0 Manual Del Usuario página 24

When you have finished, press the SoFT KEY to select FLASH again
to continue your conversation with the first caller.
Programming the One Touch Memory Dial
Buttons
You can store up to 5 one-touch memory dial numbers. All numbers
will also be stored in the phone book.
Storing Memory Numbers
press the memory key (M1 – m4 or SoS) while in Standby Mode
The display shows "Number?" Enter the desired telephone number
(up to 20 digits), press the SoFT KEY to select NEXT
Using the DoWN KEY scroll through to select the Melody you would
like to associate with this number, press the SoFT KEY to confirm.
Viewing One Touch Memory Dial Numbers
In the standby mode, press the DoWN KEY
Using the Up or DoWN KEY scroll through the numbers until the
desired number is displayed.
Dialing using the One Touch Memory Buttons
In the Standby Mode, press M1 to M4 or the SoS button to dial out
the corresponding number
Editing One Touch Memory Dial Buttons
Press the SOFT KEY under MENU while in standby mode.
Press the DOWN KEY to scroll through the menu and select
PHONEBOOK then press the SOFT KEY to make your selection
Press the DOWN KEY to scroll through the menu and select EDIT
then press the SOFT KEY to make your selection
Press the DOWN KEY to scroll through to find the entry you would like
to edit is selected, press the SOFT KEY to Select
Press the Soft Key to choose ERASE to clear the incorrect digit(s) or
character(s) then enter the correct information, Press the Soft Key to
Choose Next
Use the DOWN KEY to select the Melody you would like to associate
with the number, using the Soft Key select SAVE to confirm.
Deleting Memory Numbers
press the SoFT KEY under MENU while in standby mode.
24 – ENGLISH