Technical Information; Warranty Conditions - Fanaway LED EVO1 Manual De Instrucciones

Fanaway LED EVO1 Installation Instructions
CARE AND CLEANING
1) Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to avoid
scratching the paint finish. Please turn off electricity power when you do so.
2) Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility
of an electrical shock.
3) Motor has permanently lubricated ball bearing. No need to oil
NOTE: Always turn off the power and disconnect the female plug 1 and male plug 1 before attempting to clean your fan.
FAN models
FANAWAY LED FAN
IN AUSTRALIA / NEW ZEALAND – Please refer to the separated WARRANTY STATEMENT.
IN EUROPE – If you are a European customer please contact the retail outlet where the fan was purchased for a
warranty service.
11 | P a g e

TECHNICAL INFORMATION

Rated Voltage Rated power (motor)
220-240VAC

WARRANTY CONDITIONS

Light power
40W, 3000K/4000K
60W LED driver model:
ES0363D-E090
V e r 1 . 0