Problems
The food won't turn
with the tray.
The food in the pan
isn't cooked when
using for 2in1 cooking.
The chips become
broken whilst they are
being cooked.
The food remains on
the edge of the pan.
The LCD screen does
not work.
The appliance is
abnormally noisy.
20
Causes
The food is too thick.
The tray was put on the pan when
the cooking started.
You are using too large a quantity
or the chips are too long.
The pan has too much food.
Maximum level recommended
exceeded.
The appliance is not plugged in.
The lid is open.
You suspect there is a problem in
the way the appliance motor is
working.
Solutions
Reduce the thickness of your food.
Only put the tray in during the second half
of the cooking phase.
Reduce the quantity of potatoes and
adjust cooking time. Or do not cut chips
longer than 9 cm in length.
Comply with the maximum quantities
shown on the cooking table.
Put the turn-over ring in place when
cooking chips.
Reduce the amount of food.
Reduce the quantities.
Plug the appliance in.
Close the lid.
Call the customer Helpline below.