Transport And Storage; Chuck Replacement - Pecol PROFESSIONAL AE350PRO Manual Del Usuario

4.3. Transport and storage

• Always store the power tool with the mains plug disconnected and without drill bit or
other accessory installed.
• Clean the power tool before storing (see maintenance instructions on page 50).
• Store in a dry place protected from direct sunlight, dust and excessive heat.
• In case of drops, transport or prolonged storage, check the general condition of the
power tool. Look for cracks, gaps, loose parts inside, among others, before starting it.

4.4. Chuck replacement

If there is a need to replace the chuck, it can be removed in three steps. To reinstall the
chuck, follow the reverse sequence
1
FR EN ES
P.55
PT