Configurations; Factory Settings (Default); Network Access; Network Settings - Intelbras TIP 200 LITE Guia De Instalacion

PC
5. After installation, follow the directions in the Configurations sections.

4. Configurations

4.1. Factory settings (default)

The product comes from the factory with the following network settings:
» WAN Interface (Internet Port): DHCP client (receives network IP).
» LAN Interface (PC Port): Bridge mode.

4.2. Network access

» DHCP: the IP telephone will receive an IP address, mask and gateway supplied
automatically by a DHCP server, making manual configuration unnecessary. If
the IP telephone does not receive the network settings, check to see if the IP
telephone is configured as a DHCP.
» Fixed IP: the IP address, mask and gateway will be configured manually by the
user or the network administrator.
» PPPoE: when the modem is in Bridge mode and the IP telephone functions as
a PPPoE and router, ADSL authentication is performed by IP telephone.

4.3. Network settings

Static IP (fixed)
1. Press Menu, use the
2. Use the
key to select Settings and press
keys to select Advanced and press;
;
41