Alarm Time; Alarm Volume; Clock Time; Brightness - Fisher&Paykel ICON Manual De Uso Y Cuidado

4
5
6
7
• If AlarmTunes is selected, turn the SmartDial to select the desired music
track (from 1 to 5, depending on how many songs are loaded onto the
InfoUSB), or if there are two or more songs loaded select Auto for shuffle
and press again to accept the change. Refer to the F&P Studio CD for
instructions to install and transfer music to your InfoUSB.

4. Alarm Time

• Turn the SmartDial to the Alarm Time setting and press to enter. Turn
the SmartDial to select the hour, press to accept. Turn to select the
minutes and press again to accept the change.

5. Alarm Volume

• To adjust the volume of the alarm, turn the SmartDial to the Alarm Volume
setting and press to enter. Turn the SmartDial to adjust the volume
from quiet to loud and press again to accept the change.
• To adjust the "click" volume of the SmartDial, press and hold for
3 seconds while in the Alarm Volume setting. The volume symbol will
flash, turn to select the desired volume and press again to accept the
change.

6. Clock Time

• Turn the SmartDial to the Clock Time setting and press to enter. Turn
the SmartDial to select the hour, minutes, 12-hr or 24-hr time. After each
selection, press again to accept the change.

7. Brightness

• Turn the SmartDial to the Brightness setting and press to enter. Turn
the SmartDial to select the desired Home Screen Brightness and press to
accept the change.
• To adjust the Active Screen Brightness, press and hold the SmartDial for
3 seconds and the device symbol will appear .
NOTE: The Home Screen Brightness controls the level of light emitted by
the LCD when the device is in "stand-by" or "pressure on" mode, and the
Active Screen Brightness controls the level of light emitted by the LCD
whilst navigating the Menu System.
A - 5