Sleep Data; Sensawake On/Off - Fisher&Paykel ICON Manual De Uso Y Cuidado

F&P ICON MENU SYSTEM (continued)
8
9

8. Sleep Data

Turn the SmartDial to the Sleep Data setting and press to enter. Turn the
SmartDial to either the Centers for Medicare and Medicaid (CMS) report
(US specific) or Patient report
Turn the SmartDial to scroll through each of the following statistics:
• Total Compliant Hours
• Average Compliant Hours over the last 30 nights
to access the average for the last 7 nights and again for the last night.
• Percentage of nights used greater than 4 hours over the last
30 nights . Press the SmartDial to access the percentage for the
last 7 nights.
• The number of nights elapsed since therapy commenced .
• Check Sum .
NOTE: A symbol will appear on the Display Screen when the Sleep Data
is within the compliance requirements. Once CMS requirements are met,
the data within the CMS sub-menu will stop logging.
• Exit the Sleep Data setting.
Additional Sleep Data (NOTE: This information may be restricted by your
healthcare provider.)
• AHI for last 30, 7, and 1 nights.
• Leak for last 30, 7, and 1 nights.
• 90 percentile pressure for last 30, 7, and 1 nights.
th
• SensAwake for last 30, 7, and 1 nights.
• Exit the Sleep Data setting.

9. SensAwake On/Off

• The SensAwake setting is available on both Auto and Premo models,
but may be restricted by your healthcare provider. To adjust, turn the
SmartDial to the SensAwake setting
SmartDial to select On or Off and press again to accept the change.
NOTE: This setting is not available with the Novo model.
A - 6
and press to enter.
.
and press to enter. Turn the
. Press the SmartDial