DeWalt DW0165 Manual Del Usuario página 20

E
Using DW0165S/DW0330S With
If you have a DW0165S or DW0330S, you can use
®
capability to pair it with the D
its Bluetooth
Tool Connect™ application on your cell phone
or tablet, and then mark up room photos with the
measurements you have taken.
1.
From either
the D WALT Tool Connect™ application to your
®
E
cell phone or tablet.
2. Using the D WALT
E
capture the room or space for which you want to
record the measurements, by taking room photos.
3. On the DW0165S or DW0330S keypad, press
to turn on the tool.
4.
If appears on the screen (Figure
on the Bluetooth
• On the keypad, press
menu.
• Select .
• Press
connection.
5.
Use the D WALT
E
pair your cell phone or tablet to the DW0165S or
DW0330S, and then mark up room photos with
the measurements you have taken.
THE BLUETOOTH® WORD MARK AND LOGOS ARE
REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG,
INC. AND ANY USE OF SUCH MARKS BY DEWALT IS UNDER
LICENSE. APPLE AND THE APPLE LOGO ARE TRADEMARKS
OF APPLE INC., REGISTERED IN THE U.S. AND OTHER
COUNTRIES. APP STORE IS A SERVICE MARK OF APPLE
INC., REGISTERED IN THE U.S. AND OTHER COUNTRIES.
GOOGLE PLAY AND THE GOOGLE PLAY LOGO ARE TRADE-
MARKS OF GOOGLE INC.
Viewing the Tool's Memory
Up to the last 20 measurements are stored in the
tool's memory.
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2. Press (Figure
and display the red laser dot.
20
E
or , download
Tool Connect™ application,
®
C 2
®
connection.
to display the main
®
to turn on the Bluetooth
Tool Connect™ application to
®
) toward a wall
A 1
) to turn the tool on
A 3
3.
Select
• Press
(Figure
WALT
®
• Press
• Press
Menu (Figure
• Press the arrow buttons to select
(Figure
• Press
4. View the last measurement that was taken. Press
to scroll through all the measurements that
have been stored in the tool's memory (up to 20).
Press
), turn Clearing the Tool's Memory
You can clear one or more measurements that are
currently in the tool's memory.
Clearing a Measurement
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2.
Press
and display the red laser dot.
3.
Select
• Press
(Figure
• Press
• Press
Menu (Figure
• Press the arrow buttons to select
(Figure
• Press
4.
Specify which measurement you want to delete:
• To delete a specific measurement, continue
with step 5.
• To delete ALL measurements, skip to step 6.
5. To delete a specific measurement:
• Press
measurements that have been stored in the
tool's memory (up to 20) until you display the
as the measurement type.
to display the Main Menu
).
E 2
to select .
to display the Measurement Type
).
E 3
).
E 4
.
to scroll back.
A 1
(Figure ) to turn the tool on
A 3
as the measurement type.
to display the Main Menu
).
E 2
to select .
to display the Measurement Type
).
E 3
).
E 4
.
or to scroll through the
) toward a wall