Instrument Tour; Front Panel Tour - Rohde & Schwarz NRT2 Manual De Instrucciones

®
R&S NRT2

5 Instrument Tour

5.1 Front Panel Tour

Figure 5-1: Front View of R&S NRT2
1 = NRT Sensor connector (see
2 = Touch panel (see
3 = Hardkeys (see
4 = Cursor block for scrolling in the menus, marking of parameters to be set and for numeric entries (see
"Cursor Block"
5 = USB host interface (see
6 = On/Standby key (see
NRT Sensor
See
To the left of the display, the R&S NRT2 provides the power sensor connector. The
R&S NRT2 recognizes the sensor in an initialization routine a few seconds after the
connection is made or after power-up, respectively, and immediately start measure-
ments.
The R&S NRT2 supports the following sensor types:
●
R&S NRT-Z14
●
R&S NRT-Z43
●
R&S NRT-Z44
Touch Panel
See
The R&S NRT2 displays results in windows. Depending on the measurement mode,
values are displayed digitally or graphically.
Getting Started 1430.0573.02 ─ 02
"NRT Sensor"
"Touch Panel"
"Hardkeys" on page 16)
on page 17)
"USB Host Interface"
"On/Standby Key"
Figure 5-1.
Figure 5-1.
on page 15)
on page 15)
on page 17)
on page 17)
Instrument Tour
Front Panel Tour
15