Altrex RolGuard Manual De Instrucciones página 13

gravity is moved from the centre of the RolGuard , this can become unstable and can collapse (rule
of thumb: keep your navel between the uprights of the RolGuard ). If necessary, reposition the
RolGuard more frequently.
• Never stand on the handrail of RolGuard .
• Never reposition the RolGuard while somebody is standing on it.
Additional safety tips when using RolGuard
• Never wear baggy clothing or jewellery. These could become caught when ascending or descending
the RolGuard which could lead to a fall.
• Remain alert. Concentrate when climbing a RolGuard and never do so under the influence of alco-
hol, medication or substances that may affect your ability to react.
• Take care when using electrical equipment. Aluminium RolGuard conduct electric current. Always
take precautions so that a power cable cannot become trapped or become caught when climbing,
sliding or repositioning the RolGuard . Check beforehand that the electrical cable of your tool is not
damaged.
• Frequently check that the wheels are not worn. Worn wheels may damage the support surface, or
can result in the RolGuard slipping. Frequently check the braking effect of the wheels.
• In the interest of personal safety, only use accessories or aids that have been recommended by Al-
trex.
• Do not leave any tools or other equipment at the bottom of the RolGuard which you might trip over.
Assembly and/or repair of replacement parts
Replacement parts supplied by Altrex must be assembled on the correct Altrex product and in the
same way as the part that is replaced. Assembly (attachment) and/or repair is effectuated at the
own risk and expense of the client. Altrex is not liable for damage caused by incorrect assembly
and/or repair. Against payment, Altrex can be called in for the repair of your product, and/or the
assembly of the parts in question.
Relax. It's an Altrex.
13
pag. van 20
EN DE